Poli Glow Kit
SKU:
$74.95
$74.95
per item
Do you have anold, oxidized fiberglass or gelcoat surface? Maybe on a boat or RV? There is a proven concept, for over 25 years, in restoring old fiberglass...POLI GLOW! It is not a wax, so it won't yellow or flake off. Instead, it is a polish made of a water-based polymer with urethane fortification, to improve its longevity. Our boats and RVs are always out in the sun-so we inject Poli Glow with numerous UV inhibitors to protect the finish from sun damage. By doing so, this allows it to last for a year or longer.
THE POLI GLOW KIT INCLUDES: 1 32 ounce bottle of Poli Prep, 1 32 ounce bottle of Poli Glow, 1 Microfiber Mitt Applicator, 1 Scrub Pad with a Handle, and 1 Pair of gloves
The process of applying Poli Glow is simple.
First, the surface must be completely cleaned with Poli Prep. Poli Prep removes wax, light stains and oxidation. It is a concentrate that must be dilluted 3 to 1 with water. Once diluted, put the Poli Prep mixture into a trigger sprayer and spray directly on the surface while using the scrub pad to clean until the area is dull and uniform in color. It should be completely dry before applying Poli Glow. Squirt a little Poli Glow on to the microfiber mitt and simply wipe on. Wipe Poli Glow on in one direction, working in small areas, about 4-6 foot sections are great. You MUST apply between 4 and 6 coats (Poli Glow does not work with less than four coats). Allow the product to dry in between coats, which is only about 1-2 minutes. You may go right over your vinyl decals and graphics as well as metals. Poli Glow cannot be used on aluminum but can go right over painted aluminum. Our kit is enough to do about a 30-34 foot boat or RV. It will last over a year and then it must be reapplied. It is not a one time application but must be reapplied once every 12 months.
First, the surface must be completely cleaned with Poli Prep. Poli Prep removes wax, light stains and oxidation. It is a concentrate that must be dilluted 3 to 1 with water. Once diluted, put the Poli Prep mixture into a trigger sprayer and spray directly on the surface while using the scrub pad to clean until the area is dull and uniform in color. It should be completely dry before applying Poli Glow. Squirt a little Poli Glow on to the microfiber mitt and simply wipe on. Wipe Poli Glow on in one direction, working in small areas, about 4-6 foot sections are great. You MUST apply between 4 and 6 coats (Poli Glow does not work with less than four coats). Allow the product to dry in between coats, which is only about 1-2 minutes. You may go right over your vinyl decals and graphics as well as metals. Poli Glow cannot be used on aluminum but can go right over painted aluminum. Our kit is enough to do about a 30-34 foot boat or RV. It will last over a year and then it must be reapplied. It is not a one time application but must be reapplied once every 12 months.
